Component	Specifications / Function	Bild
C-BUS26	iTRONIC component carrier 19" (26 width units) 6 x slot for iTRONIC components (of which 1x power-supply, 1x CPU and 4 freely allocatable) for installation into control cabinet
C-BUS42	iTRONIC component carrier 19" (42 width units) 10 x slot for iTRONIC components (of which 1x power-supply, 1x CPU and 8 freely allocatable) for installation into control cabinet
X-BUS63	iTRONIC component carrier 19" (63 width units) 15 x slot für iTRONIC components (of which 1x power-supply, 1x CPU and 13 freely allocatable) for installation into control cabinet
OP-DW2LRF	Operating and control panel DrumWare (2 parts) type At right: QVGA display (monochrome), 25 short-stroke keys with LED links: 6 LED display (7-segment), 8 LED block display, 26 short-stroke keys LED Processor: SC520 (133MHz), Ethernet, 2x CAN, div. I/O, supply: 24VDC Option: RFID reader, customized design With mounting frame for installation of the door, protection class (front) IP65
OP-DW2LF	Operating and control panel TanWare type QVGA display (monochrome), 25 short-stroke keys with LED CPU: SC520 (133MHz), Ethernet, 2x CAN, div. I/O, supply: 24VDC Option: RFID reader, customized design With mounting frame for installation of the door, protection class (front) IP65
OP-SW	Operation terminal StartWare type LCD display 4x20 symbols, 44 short-stroke keys Processor: ST6, RS232/422/485, div. I/O, supply: 24VDC With mounting frame for installation of the door, protection class (front) IP65
QWT5-BAS	Operation/Control and data-acquisition terminal QualityWare LCD graphic display (240x64), 25 short-stroke keys Processor: ARM7, optional ARM9 4 x digital input, 2 x relay output, 1 x CAN, supply: 24VDC 5 module slots: Ethernet, Digital I/O, Pt100, RS232/RS485, CAN, 0(4)..20mA, 0..10V Option: RFID reader Sealed plastic housing (IP65) Mountable to wall, desk or panel
QWT2-BAS	Terminal TankWare type LCD graphic display (240x64), 5 robust installed styluses (illuminated) Processor: dsPIC 8 x digital input, 4 x output (short-circuit proof), 4 x relay output, 1 x CAN, 1 x serial RS232, supply: 24VDC Option: RFID reader Self-contained plastic housing (IP65), wall-mountable
DWT2-20	Mainboard DWT2 Operating panel - mainboard for DrumWare/TanWare systems as of 2005
RS485-DWT2-20	Module for serial communication RS485 for component DWT2-20
DWTERM-H	Mainboard DWTERM Mainboard for TanWare systems until 2005
SW-TERM	Mainboard SWT Operating panel mainboard for StartWare systems
QWT20	Mainboard QWT 2 / MWT Operating panel mainboard for TankWare systems
QWT50	Mainboard QWT 5 Operating panel mainboard for QualityWare systems
DWTERM-T	Keypad PCB for DrumWare/TanWare operating panel For TanWare/DrumWare systems as of 1998
DW-PANEL	Keypad PCB for DrumWare operating panel (left side) For DrumWare systems as of 1998
CPUX	iTRONIC processor component CPUX Containing basic and processor module ICM188 Processor: AM188ES/ER, 512kB Flash, 512 kB battery backed SRAM, Real-time clock, Arcnet controller, 1 slot for interface module, 2 rotary selectors (16 positions each) Connectors: D-Sub, iTRONIC bus
ICM188	Processor module ICM188 For component CPUX Processor: AM188ES/ER, 512kB Flash, 512 kB battery backed SRAM, Real-time clock
CPU2	Processor component CPU2 Proc: SC520-133, 1 MB battery backed SRAM, real-time clock, 1 slot for interface module, Ethernet 10Base-T, 2 rotary selectors (16 positions each) Ports: D-Sub (RS232/485), iTRONIC bus, RJ45 (Ethernet)
RS232-CPU2	Module for serial communication RS232 for package CPU2
RS485-CPU2	Module for serial communication RS485 for package CPU2
CPU3-11	Processor component CPU3 Containing: basic and processor module Processor: SC520-133, Ethernet 2x CAN connector integrated, RS232 integrated, Ethernet 100BT, 32 MB SDRAM, 4 MB onboard flash, CF card Connectors: spring-loaded jumper clamp, D-Sub (RS232/485), RJ45, iTRONIC bus
CPU-DS30	iTRONIC-Periphery-processor package CAN connector and 24VDC power-supply unit integrated, RS232 integrated Processor: dsPIC, 1 slot for interface module Connectors: pen-stroke-plug terminal, D-Sub, iTRONIC-Bus
ARC	iTRONIC Arcnet network card e.g. for communication between control and operating panel Connectors: RG62, iTRONIC-Bus
CAN	iTRONIC-CAN fieldbus enabling Module slot for galvanic isolation Connectors: D-Sub pin / 9-pole socket, iTRONIC bus
AD8	iTRONIC analog input component (8 circuits) Capacity of up to 4 measuring modules, 2 circuits per measuring module (IFPT100 / UI-10V, UI-20MA) Connector: screwable jumper clamp, iTRONIC bus
IFPT100	Measuring module Pt100 (four-wire measuring) To plug onto component AD8
UI-10V	Measuring module 0...10V, 2 circuits To plug onto component AD8
UI-20MA	Measuring module 0/4...20mA, 2 circuits, To plug onto component AD8
DA1	iTRONIC analog output component 1 circuit, 0/4..20mA, 0..10V (configurable) Connector: screw-plug terminal, iTRONIC bus
DA2	iTRONIC analog output component 2 circuits, 0/4..20mA, 0..10V (configurable) Connector: screw-plug terminal, iTRONIC bus
BWP	iTRONIC Inkjet printhead triggering BWP additional 2 galvanically isolated inputs (24VDC) Connectors: D-Sub 15-pole socket, screw-plug terminal, iTRONIC bus
IE2	iTRONIC incremental-encoder interface 2 circuits, galvanically isolated, 24 Bit, onboard power-supply for encoder supply Connectors: D-Sub 9-pole socket, screw-plug terminal, iTRONIC bus
IE2C	iTRONIC incremental-encoder interface 2 circuits, galvanically isolated, 24 Bit, onboard power-supply for encoder supply Connectors: pen-stroke terminal, screw-plug terminal, iTRONIC bus
IFC	iTRONIC interface for line scan camera, RS422 Connectors: D-Sub 37-pole stylus, iTRONIC bus
IFZK	Interface for line scan camera, RS422, DCDC converter (24V to 5V) for camera supply Connectors: D-Sub 37-pole stylus, header
IN16	iTRONIC digital input component (16 circuits) 16 x input 24VDC (1 reference potential), galvanically isolated, diagnoseLEDs Connectors: screw-plug terminal, iTRONIC bus
OUT16	iTRONIC digital output component (16 circuits) 16 x transistor output, 24VDC, 500mA max., short-circuit proof, Galvanically isolated, diagnose LEDs Connectors: screw-plug terminal, iTRONIC bus
REL8	iTRONIC digitale output component (8 circuits) Relay of 2 sets of 4 each – output (NOC) diagnose LEDs Connectors:screw-plug terminal, iTRONIC bus
SIMU	iTRONIC universal input/output component CAN based, co-processor ARM7, 8 x input, 8 x output digital / analog 0-5VDC, 0-24VDC, in-/output feature individually configurable Connectors: D-Sub 37-pole socket, iTRONIC bus
NTX	iTRONIC power-supply component To supply component carrier C-BUS/X-BUS, Arcnet enabling and RS485 interface, input 24VDC (15-32VDC) optional Connectors: screw-plug terminal, BNC, iTRONIC bus
NTX-DW	Power supply for mainboard DWTERM-H with Arcnet enabling and RS485 interface (galv. isolated) Connectors: screw-plug terminal, BNC, header
OPDM	iTRONIC control component for operating panel (OPDX) Connectors: D-Sub 25-pole socket , iTRONIC bus
OPDX	Interface for operating panel Connectors: 16- / 20- / 26-pole headers
CPX2-TTL	RFID reader Version for internal installation (operating panel DWTERM_H) TTL Connectors: pole plug
ID-TTL-Int	RFID-Reader Version for internal installation (operating panel DWT2) RS232 Connector: 9-pole D-Sub stylus
PCARC-ISA	Arcnet enabling for PC Connectors: BNC, D-Sub socket 9-pol, ISA bus
RJ45-IF	RJ45 terminal with integrated shield connector 8-pole Connectors: RJ45, cutting/pinheader
SEW-TX	SenseWare emitter unit Wireless temperature measurement, no batteries, for Pt1000
SEW-RX	SenseWare receiverer unit Wireless temperature measurement, no batteries 24VDC, CAN
ID-TTL-Ext	RFID-Reader Desk version, RS232 Supply: 5VDC using wall-power supply Connector: 9-pole D-Sub hollow socket